Bitumen
High-quality bituminous products for the best quality roads in Qatar.
- Product & Services
- Products
- Bitumen
Share :
Qatar Fuel (WOQOD) is the leading supplier and distributor of high-quality bitumen and bituminous products in Qatar. We serve various industrial segments, especially the roads, highways, and infrastructure industry, since 2003. We take pride in delivering superior products and services that meet the needs of our clients.
WOQOD Bitumen Operations are based in Mesaieed Industrial City (MIC), southeast of Qatar. Our infrastructure includes onshore storage tanks, offshore bitumen ships, and state-of-the-art production plants for bituminous products.
- Penetration Bitumen 60/70:
One of the most widely used grades of bitumen across the world for road works, waterproofing, and other industrial applications.
|
Specifications |
|
|
Conform to |
QCS 2014 / ASTM D946 |
|
Product Type |
PENETRATION GRADE BITUMEN 60-70 |
|
Product Code Name |
WOQOD BITUMEN 60-70 |
|
Major Tests |
Test Method |
Spec |
|
|
Min. |
Max |
||
|
Penetration (0.1 mm) at 25°C, 100g, 5 Sec |
ASTM D5 |
60 |
70 |
|
Softening Point (Ring & Ball Apparatus), °C |
ASTM D36 |
46 |
- |
|
Flash Point, Cleveland Open Cup, °C |
ASTM D92 |
230 |
- |
|
Ductility at 25 °C, cm |
ASTM D113 |
100 |
- |
|
Solubility Trichloroethylene, % |
ASTM D2042 |
99 |
- |
- PMB (Polymer Modified Bitumen PG76-10E):
Polymer Modified Bitumen PG76-10E used in asphalt mix designs with good elasticity suitable for roads, runways, and race tracks which significantly increases stability, strength, anti-rutting properties, and longer lifespan.
|
Specifications |
|
|
Conform to |
QCS 2014 / AASHTO M332 |
|
Product Type |
POLYMER MODIFIED BITUMEN (PMB) |
|
Product Code Name |
PG 76-10 E |
|
Major Tests |
Test Temp. |
Test Method |
QCS 2014/AASHTO M332 Spec (PG 76E-10) |
|
|
Original Binder |
||||
|
Flash Point, °C |
|
ASTM D92 |
min 230 |
|
|
Rotational Viscosity, Pa.s |
135°C |
ASTM D4402 |
max 3.00 |
|
|
Dynamic Shear (G*/sinδ, 10 rad/sec), kPa |
76°C |
ASTM D7175 |
min 1.00 |
|
|
Separation Test: Absolute Difference between G* of Top and Bottom Specimens, % |
163°C |
ASTM D7173 |
max 20 |
|
|
Particulate Retained on Sieve Test, % |
163°C |
PWA 100 |
0 |
|
|
Solubility |
|
ASTM D5546 |
min 99 |
|
|
Rolling Thin Film Oven (RTFO) Residue (@163°C) |
||||
|
Dynamic Shear (G*/sinδ, 10 rad/sec), kPa |
76°C |
ASTM D7175 |
2.2 |
|
|
MSCR, Jnr3.2 , kPa-1 |
76°C |
ASTM D7405 |
max 0.50 |
|
|
Pressurized Aging Vessel (PAV) Residue (@110°C, 2.10 Mpa, 20hr) |
||||
|
Dynamic Shear (G*×sinδ, 10 rad/sec), kPa |
37°C |
ASTM D7175 |
max 6000 |
|
|
Creep Stiffness |
Bending Beam, S (60s) MPa |
0°C |
ASTM D6648 |
max 300 |
|
m-value (60s) |
min 0.300 |
|||
- Cutback MC-70 Bitumen:
Bitumen designed to be used as a primer in coating roads. It is used in road maintenance, as well as in the construction of buildings and other structures.
|
Specifications |
|
|
Conform to |
QCS 2014 / ASTM D2027 |
|
Product Type |
MEDIUM CURING CUTBACK BITUMEN |
|
Product Code Name |
WOQOD CB MC-70 |
|
Major Tests |
Test Method |
Spec |
|
|
Min. |
Max. |
||
|
Kinematic viscosity at 60°C (140°F), mm2/s |
ASTM D2170 |
70 |
140 |
|
Flash point (Tag open-cup), °C |
ASTM D3143 |
38 |
- |
|
Distillate test: |
ASTM D402 |
|
|
|
Distillate, volume percent of total distillate to 360°C: |
|
|
|
|
to 225°C |
- |
25 |
|
|
to 260°C |
10 |
70 |
|
|
to 316°C |
65 |
93 |
|
|
Residue from distillation to 360°C, percent volume by difference |
55 |
- |
|
|
Water, % |
ASTM D95 |
- |
0.2 |
For inquiries and further information, please contact us at: bitumensales@woqod.com.qa
