Diesel Fuel Injector Cleaner

Features: Diesel Fuel Injector Cleaner is developed to prevent wear on common rail and pump injection vehicles. Formulated with lubricant enhancing and cleaning additives, it cleans the injectors and provides precise spraying. Improves exhaust emission by increasing ignition efficiency. Reduces formation of smoke and odour on first start-up. Prevents formation of dirt in the fuel system and combustion chamber. Increases combustion efficiency by keeping injectors clean. Reduces fuel consumption and improves engine performance. It improves the lubrication properties of low sulphur diesel fuels and provides protection against wear in the fuel pump. Increases the cetane number of fuel. It prevents corrosion formation with its antioxidant content. Suitable for use with Turbo and Catalytic Convertor vehicles. For all diesel engines with/without Diesel Particulate Filter (DPF); Common Rail and Pump are used as a breakdown prevention for injector technology. Compatible with turbo vehicles. App

Engine Oil Treatment

Features: OTO Pro Engine Oil Treatment prevents excessive oil consumption due to wear and helps to reduce fuel consumption. The product reduces exhaust smoke caused by excessive oil consumption. Restores compression and improves engine performance. Reduces engine noise and wear by forming stable oil film layer between cylinder and piston. Application: Add to the engine oil while engine is warm. One bottle of 375 ml engine oil treatment treats up to 4 litres of engine oil.

Diesel Fuel System Cleaner

Features: Diesel Fuel System Cleaner cleans and keeps the entire fuel system (injectors) clean and reduces black smoke and the resulting soot emissions. Helps to reduce carbon deposits in the combustion chamber. Helps to improve the combustion and engine performance. Reduces diesel knocking noise. Lowers fuel consumption. Decreases the combustion temperature of soot particulates. Prolong the lifetime of the soot filters. Protects the fuel system against premature wear and damage by reducing rust and corrosion formulation. Does not harm oxidizing catalysts or soot filters of diesel engines. Application: One bottle of 375ml product is added directly to the fuel tank. It is sufficient for 60 litres of fuel. It is recommended to add the product before filling the tank to have a good mixture of the product with the fuel. Repeat treatment every 5000 km (3000 miles).

Carburetor Cleaner

Features: Carburetor cleaner is a special mixture of solvents to provide e¬ffective internal and outer cleaning for carburetors. Can also be used for cleaning idling vents and suction aps instantly and safely without smearing. Allows moving parts to work properly with its special lubricating feature. Can be used as an oil and gasoline stain cleaner in industry, assembly, and maintenance services. Application: Shake the can well before use. Spray it at a distance of 20 cm. Spray on the dirty surfaces and wait for penetration. Dry the parts with a dry piece of cloth at a well-ventilated place or outside. Apply multiple times if meet with extreme dirt. Contains ozone friendly propellant.

Engine Flush

Features: Engine Oil Flush is suitable for all diesel and gasoline vehicles. The product effectively removes sludge, sediment, and deposits in the engine. Penetrates fast to difficult places in the engine, cleans oil grooves and rings. Does not damage rubber gaskets. Application: Apply one 375ml bottle of product before oil change. Check the oil level and warm up the engine. Turn off the engine and pour the engine flush into the oil pan. Turn on the engine and leave the engine running idle for about 5-10 minutes. Do not increase engine speed by revving the engine or driving. Turn off the engine, drain the used oil, close the oil drain, replace the oil filter and pour in new oil. Engine flushing is recommended at every oil change.

Fuel Injector Cleaner

Features: Fuel Injector Cleaner removes dirt and soot from the fuel tank to the combustion system, thanks to its powerful formulation. Suction, throttle, combustion chamber and catalytic system removes dirt and soot. This prevents irregular engine running and high emissions of the catalytic converter when cleaned, and harmful emissions are reduced. It can also be used as a problem solver when the emission values are high. Application: Add one 375ml bottle of fuel injector cleaner directly into the fuel tank. Sufficient for 60 litres of fuel.

Octane Booster

Features: Octane Booster helps to make the engine run easier in all weather conditions. It provides better fuel combustion, increases engine power, and saves fuel. The product cleans engine residue and reduces engine power loss, exhaust fumes and pollution, thereby reducing maintenance costs. Proper use helps keep your engine well maintained and clean. Application: Mix one 375ml bottle of octane booster with 40-60 litres of fuel.

Coolant Additive

Features: Coolant Additive is a water-based, highly concentrated additive package designed to prepare a high-quality engine coolant concentrate with the addition of monoethylene glycol. The additive pack is based on long proven technology to produce a high-performance finished coolant which is NAP (nitrite, amine, phosphate) free. It provides outstanding protection against corrosion and overheating. Application: One bottle of 375ml product is added directly to the radiator tank.

Engine Oil Treatment- Antismoke

Features: Anti-Smoke Engine Oil Treatment is compatible with all mineral, semi-synthetic and synthetic oils. By increasing the engine oil film resistance, it ensures smooth engine operation in all road and climatic conditions. The product contains additives that reduce exhaust gas and prevents the oil from burning. It is used in all 4-stroke gasoline, diesel, and LPG engines. Application: Change the engine oil and oil filter. Run the engine for 15 minutes. Shake the product well and add to the engine oil. Run the engine for another 15 minutes. One bottle of 375ml anti-smoke engine oil treatment is sufficient for vehicles that take up to 5 litres of engine oil

Gasoline Fuel System Cleaner

Features: Complete Fuel System Cleaner for gasoline engines improves the combustion and engine performance. Cleans and keeps clean the entire fuel system (injectors, carburetor, and valves). Reduces carbon deposits in the combustion chamber. Reduces CO and HC emissions. Lowers fuel consumption. Protects the fuel system against premature wear and damage by reducing rust and corrosion formation. Does not harm catalytic converters. Application: One bottle of 375ml product is added directly to the fuel tank. It is sufficient for 60 litres of fuel. It is recommended to add the product before filling the tank to have a good mixture of the product with the fuel. Repeat treatment every 5000 km (3000 miles).